Dallmer roof drainage
Roof drains to a single-or double-layer constructions of the roof. The outflow can be horizontal or vertical. Available in the following versions:
-With bolted stainless steel ring
-DallBit: Body of bitumen pre-welded to a flange having a thickness of 4.7 mm. Additionally secured by a stainless steel ring.
-PVC: Complete roof drain made of PVC
-FPO-PE: With wide flange for connection to the layers of roof FPO polyethylene-based material.
-FPO-PP: With wide flange for connection to the layers of roof FPO polypropylene-based material.
H = heated roof drain: direct connection to 230V electrical wiring, heating tape tested on the basis of VDE 0721 Part 1/3.78.
|
|
Roof drain body for a one-or two-layer construction of the roof. Thermally insulated drain body. Vertical drain socket complete with: stainless steel flange for attaching the polymer roofing, leaves catcher, protective cover.
Material: Polypropylene, UV-resistant Outflow: DN 70, DN 100, DN 125, DN 150
Available versions: Heating, Dallbit, Dallbit heated, PVC, PVC heated
Mounting hole: 255 x 380 mm
Drilling diameter: 255 mm |
|
|
Roof drain body for a one-or two-layer construction of the roof. Thermally insulated drain body. Outflow connector horizontal with: stainless steel flange for attaching the polymer roofing, leaves catcher, protective cover.
Material: Polypropylene, UV-resistant
Outflow: DN 70, DN 100
Available versions: Heating, Dallbit, Dallbit heated, PVC, PVC heated
Mounting hole: 260 x 380 mm
|
|
|
Extension suited to roof drains 62 and 64 complete with: stainless steel flange for attaching the polymer covering the roof, seal preventing returning of water, protective cover.
Material: Polypropylene, UV-resistant
Height adjustable from 50 to 250 mm.
Otuflow: DN 70, DN 100, DN 125, DN 150
Available versions: Dallbit, PVC
|
Result Pages: 1
Displaying 1 to 3 (of 3 products)
