ACO Profiline

 

     

Channels:

Load Class : Suitable for pedestrian and transit wheelchairs

Material: Galvanized steel or stainless steel

Types of channel: without slope

Inside width : 100, 130 , 250 mm.

Compensation element: Enables smooth adaptation length in the range of 5-50 cm. between two basic elements or the base element .

Corner element :

Allows you to adjust the angle of 0-90 degrees.

Roof drain cover :

Allows easy access to roof drain for cleaning and maintenance.

Side element :

It combines the surface strings of channels or channel with grooved roof .

Grates:

They are covering the channel, improve aesthetics and reduce the amount of pollution.

Advantages of the system:

- Drainage area and reception of horizontal drainage (gravel, grit )

- Safe and fast drainage of large quantities of rainwater

- Security of the internal moisture from entering

- Prevents splashing water at the sudden downpours

- Solution tailored for people with disabilities

- The bottom of the channel to allow for cleaning without damaging the waterproofing

T
ypical applications:

Roof space, terraces and balconies with a surface of stone slabs or concrete, green terraces, roof gardens, protruding part of the facade (areas of the ceiling structure inverted ) .

TYPE I - height adjust. from 5.5 to 7.8 cm., width 10/13/25/50 cm., length  50/100 cm

TYPE II- height adjust. from 7.8 to 10.8 cm, width 10/13/25/50 cm., length 50/100 cm

TYPE III - height adjust. from 10.8 to 16.8 cm, width 10/13/25/50 cm length 50/100 cm

fixed height - height 5 cm., width 13 cm., length 50/100/200

fixed height - height 7.5 cm., width 13 cm., length 50/100/200

 

ACO_Profiline.pdf (1.76 MB) ACO_Profiline.pdf

 

View:

Sort:  

ACO Profiline Typ I width: 10 cm.

ACO Profiline, galvanized steel or stainless steel, with integrated gravel strip, without grate.

Total width: 10 cm.

Adjustable height: 5.5-7.8 cm.

The system includes:

-Channel 1 m

-Channel 0.5 m

-Corner element

-The final
compensatory

-The center
compensatory

-Endcap

 

ACO Profiline Typ II width: 10 cm.

ACO Profiline, galvanized steel or stainless steel, with integrated gravel strip, without grate.

Total width: 10 cm.

Adjustable height: 7.8-10.8 cm.

The system includes:

-Channel 1 m

-Channel 0.5 m

-Corner element

-The final
compensatory

-The center
compensatory

-Endcap

 

ACO Profiline Typ III width: 10 cm.

ACO Profiline, galvanized steel or stainless steel, with integrated gravel strip, without grate.

Total width: 10 cm.

Adjustable height: 10.8-16.8 cm.

The system includes:

-Channel 1 m

-Channel 0.5 m

-Corner element

-The final
compensatory

-The center
compensatory

-Endcap

 

ACO Profiline grates width: 10cm.
Grates made ​​of galvanized steel or stainless steel with mounting, suitable for pedestrian and transit wheelchairs.

Types of grates:

-Lattice-MW 30 x 10

-Perforated

-The corner holes 50 x 50
ACO Profiline Typ I width: 13 cm.

ACO Profiline, galvanized steel or stainless steel, with integrated gravel strip, without grate.

Total width: 13 cm.

Adjustable height: 5.5-7.8 cm.

The system includes:

-Channel 1 m

-Channel 0.5 m

-Corner element

-The final
compensatory

-The center
compensatory

-Endcap

ACO Profiline Typ II width: 13 cm.

ACO Profiline, galvanized steel or stainless steel, with integrated gravel strip, without grate.

Total width: 13 cm.

Adjustable height: 7.8-10.8 cm.

The system includes:

-Channel 1 m

-Channel 0.5 m

-Corner element

-The final
compensatory

-The center
compensatory

-Endcap

ACO Profiline Typ III width: 13 cm.

ACO Profiline, galvanized steel or stainless steel, with integrated gravel strip, without grate.

Total width: 13 cm.

Adjustable height: 10.8-16.8 cm.

The system includes:

-Channel 1 m

-Channel 0.5 m

-Corner element

-The final
compensatory

-The center
compensatory

-Endcap

no foto
Channels made of galvanized steel or stainless steel, with a fixed height of 5 or 7.5 cm.

Overall length: 200, 100, 50 cm.

Total width: 13 cm.

Total height: 5, 7.5 cm.

At the end of the channels endcap is applied.
ACO Profiline grates width: 13cm.
Grates made ​​of galvanized steel or stainless steel with mounting, suitable for pedestrian and transit wheelchairs.

Types of grates:

-Lattice-MW 30 x 10
-Lattice-MW 30 x 14
-Perforated 
-The corner holes 50 x 50
-Cross-bridges
-Transverse bar
 

 

ACO Profiline Typ I width: 25 cm.

ACO Profiline, galvanized steel or stainless steel, with integrated gravel strip, without grate.

Total width: 25 cm.

Adjustable height: 5.5-7.8 cm.

The system includes:

-Channel 1 m

-Channel 0.5 m

-Corner element

-The final
compensatory

-The center
compensatory

-Endcap

ACO Profiline Typ II width: 25 cm.

ACO Profiline, galvanized steel or stainless steel, with integrated gravel strip, without grate.

Total width: 25 cm.

Adjustable height: 7.8-10.8 cm.

The system includes:

-Channel 1 m

-Channel 0.5 m

-Corner element

-The final
compensatory

-The center
compensatory

-Endcap

ACO Profiline Typ III width: 25 cm.

ACO Profiline, galvanized steel or stainless steel, with integrated gravel strip, without grate.

Total width: 25 cm.

Adjustable height: 10.8-16.8 cm.

The system includes:

-Channel 1 m

-Channel 0.5 m

-Corner element

-The final
compensatory

-The center
compensatory

-Endcap

ACO Profiline grates width: 25cm.
Grates made ​​of galvanized steel or stainless steel with mounting, suitable for pedestrian and transit wheelchairs.

Types of grates:

-Lattice-MW 30 x 10
-Lattice-MW 30 x 14
ACO Profiline roof drain cover
Roof drains cover made of galvanized steel or stainless steel, without the grid.

Dimensions (L x W x H):

-25x25x5 cm. 

-25x25x7.8-10.8 cm.

-40x40x5 cm.

-40x40x7.8-10.8 cm.

-50x50x5 cm.

-50x50x7.8-10.8 cm.

ACO Profiline extension to roof drains covers

Extension to roof drains covers, made ​​of galvanized steel or stainless steel, without the grid.

Dimensions (L x W x H):

-25x25x3 cm. 

-25x25x6 cm.

-25x25x12 cm. 

 

-40x40x3 cm. 

-40x40x6 cm.

-40x40x12 cm. 

-50x50x3 cm. 

-50x50x6 cm.

-50x50x12 cm.  

 

no foto
Side element for connecting under surface the channels or channel with outlet.


Total length: 200 cm.
Total width: 10 cm.

Total Height: 3 inches.

 

no foto
Grates made ​​of galvanized steel or stainless steel with mounting.

Types of grates:

-Lattice-MW 30 x 10
-Lattice-MW 30 x 14 (just for covers 25x25 and 40x40)

Result Pages:  1  Displaying 1 to 17 (of 17 products)
       
We use cookies to improve your experience. By your continued use of this site you accept such use. To change your settings please see our Privacy Policy cookies.